• Manufactured by Control Signal® Corporation.

• Has large, bright, 4-digit LED display.

• Decodes ANI transmitted from any radio with Motorola® MDC-1200 or with Control Signal ANI encoder, Model ID-12.

• Operates on either 115 volts AC or 12 volts DC.

• Works with any receiver. Hooks up to any audio with level between 100 MV and 5 volts.

• Decodes numeric ANI, up to 4 digits; no alpha.

• Each ID is tagged with time and date.

• Has a printer port. Hooks up to any PC printer (dot matrix preferred).

• Has an RS232 port with 9600-baud rate. Hook up to a PC and use Microsoft Windows terminal emulator to display the ID, date and time of transmission.

• For incoming Emergency ID, the ID-1201 will show a flashing ID with an audible alarm.

• Has a data-mute capability which blanks 95% of the ID data burst.

• Dimensions:  6-3/4 inches wide, 4 inches tall, 1 inch thick, and sits on a weighted base.

• Three top-mounted pushbuttons allow for setting up the unit (time & date), shutting the Emergency alarm, and clearing the ID from the display.

• Has slide switch for selection of input signal impedance.

• Has an internal trimpot for adjusting alarm audio level.

• Has internal jumpers for turning on signal pre-amp and de-emphasis.

• One-year factory warranty.

Frequently Asked Questions