Specifications |
Audio Output |
Amplitude:
0-500 mv peak-to-peak into 600 ohms. 0-12 volts DC bias. Less than 20 ohms during ID, more
than 50K ohms when not sending ID. |
| Base Frequency:
1200 Hz. |
| Encoding:
Compatible with Motorola MDC-1200 ANI. |
| ID Types:
Transmits
an initial ID or final ID, or both. Codes 0-9999 can be programmed into its memory. |
| Power Requirements |
7-15
volts DC, negative ground at 0.3 ma standby, 3 ma operating. |
| PTT
Input |
Contact
closure to ground initiates ID. |
| PTT
Line Output |
+30
volts DC maximum open circuit. Output transistor closes PTT line
to ground during PTT switch closure. Maximum current sink is 100
ma. |
| Emergency
Activation |
Momentary
emergency input to ground locks the ID-12 into Emergency Mode
and Transmits a special ID code. It repeats this code 8 times at
random intervals. |
| Initial
Delay |
Programmable
to between 10 and 2500 msec. |
| Stuck-Mike
Time-out Timer |
Programmable
to between 10 and 250 seconds. |
| Dimensions
(L x W x H) [Inches] |
With programming tab in place: .75 x .72 x .12 |
|
With programming tab removed: 62 x .72 x .12 |
| Connection |
14"
flying leads |
